Two-Axis Print Check: Choose the Next Step

A static decision guide for interpreting a reference shape before printing a full sewing pattern.1. Read the reference
Use the dimensions and measurement edges stated in the actual pattern. Record target width, target height and units. Do not assume every reference is a 100 mm square.
2. Is the shape complete?
If an edge or reference mark is clipped, a size calculation cannot recover the missing content. Check the file, paper format and printer margins before another test page.
Incomplete reference: investigate clipping → Keep a record before retrying
Complete reference: compare both axes → 3. Compare proportional scale
3. Compare proportional scale
Calculate observed width/target width and observed height/target height. Equal proportions matter; equal differences in millimetres are not sufficient for a rectangular reference.
Both match the pattern's requirement → A matching shape is one check
Equal proportions, both off target → Equal proportions: one mathematical multiplier
Different proportions → Different proportions: preserve the disagreement
Equal proportions: one mathematical multiplier
Hypothetical example: target 80 x 40 mm, observed 76 x 38 mm. Both scale ratios are 0.95. The mathematical multiplier is 20/19, about 1.052632. This describes a model; first restore the documented printing settings and verify a fresh test.
Different proportions: preserve the disagreement
Hypothetical example: target 80 x 40 mm, observed 76 x 40 mm. Width is 95%; height is 100%. A uniform enlargement would also enlarge the correct height. Recheck measurement edges, file and settings, then retest.
A matching shape is one check
Also inspect the pattern's page edges, registration marks and assembly instructions. Reference dimensions do not establish garment fit or confirm every page.
Keep a record before retrying
Record file version, paper format, viewer, scaling settings and both readings. Use one test page for the next check and follow the pattern publisher's instructions.
Read the complete Sewlore printing and assembly workflowPrepared by Sewlore with AI-assisted writing. Numerical examples are hypothetical; no physical testing was performed.All rights reserved for any applicable copyright. No new open reuse licence is granted.